Red Mountain Makers upcoming events

Intermediate Welding: Introduction to TIG welding (10/16/2026)

Fri, 16 Oct 2026 22:30:00 GMT

TIG welding is most commonly used to weld thin sections of stainless steel and non-ferrous metals such as aluminum, magnesium, and copper alloys. The process grants the operator greater control over the weld than competing processes such as MIG welding, allowing for stronger, higher quality welds. Students will have the opportunity to learn the basic techniques of the TIG process and practice with feedback from an expert. It is recommended to take the basic Intro to welding (MIG) class before this TIG class.

What to wear: At RMM, you must dress safely and appropriately. Arrive for class in all-natural fiber clothing (100% cotton), long pants, and closed-toe, closed-heel shoes with socks that protect up to the ankle. Long hair must be tied back. Nylon, polyester, spandex, or other synthetics are not allowed around machines, equipment, or processes that can produce hot fragments, sparks, or flames. Additional protective gear will be provided as needed.

About the Instructor: Stephen Charles is a former Welding Engineer with many years of experience in production welding and custom fabrication. He has taught hundreds of beginners in the basics of welding and fabrication. Also, he’s pretty funny, so if you don’t have a sense of humor there will be many moments of awkward silence.

Introduction to Welding (MIG) (10/16/2026)

Fri, 16 Oct 2026 23:00:00 GMT

Develop fundamental skills in joining metal objects under the instruction of Stephen Charles, a former Welding Engineer and owner of Metalcraft Creative. This is an introductory class with no prior experience necessary. It includes a crash course in the MIG welding process, metal cutting, grinding, as well as the basics of hand tool use and shop safety.

Students will leave with a wide familiarity of skills and studio techniques.

NOTE: This class is a pre-requisite for the other welding process classes (stick and TIG) as well as any Project-Based Metalcraft classes.

What to wear: If you use glasses to read, please bring them. If you can't see, you will struggle welding well. At RMM, you must dress safely and appropriately. Arrive for class in all-natural fiber clothing (100% cotton), long pants, and closed-toe, closed-heel shoes with socks that protect up to the ankle. Long hair must be tied back. Nylon, polyester, spandex are flammable and should not be worn around welding equipment, or processes that can produce hot fragments, sparks, or flames. Additional protective gear (hood, jackets, gloves) will be provided as needed.

Age: there are no age restrictions to the class, though minors must be supervised by a guardian at all times. Please read carefully the disclaimers and guidelines and contact us with any questions or concerns.

Refund and Cancellation Policy

Introduction to Welding (MIG) (11/13/2026)

Sat, 14 Nov 2026 00:00:00 GMT

Students will leave with a wide familiarity of skills and studio techniques.

NOTE: This class is a pre-requisite for the other welding process classes (stick and TIG) as well as any Project-Based Metalcraft classes.

Refund and Cancellation Policy

Introduction to Welding (MIG) (12/11/2026)

Sat, 12 Dec 2026 00:00:00 GMT

Students will leave with a wide familiarity of skills and studio techniques.

NOTE: This class is a pre-requisite for the other welding process classes (stick and TIG) as well as any Project-Based Metalcraft classes.

Refund and Cancellation Policy

Torch Welding, Brazing, and Soldering with the Oxy acetylene Torch - making a wire frame cube (01/30/2027)

Sat, 30 Jan 2027 15:00:00 GMT

Learn how to weld three metals together:

This course covers different methods of adjoining metal together by use of a torch with the techniques of welding, brazing, and soldering. The differences in these techniques will be covered and the process demonstrated. The metals being a-joined include steel to steel, copper to copper, and Aluminum to aluminum, dissimilar joining between the three metals will also be touched on and demonstrated. In this class students will bond various metals with the aid of a gas fueled torch. Subjects like filling rods, fluxes, and various torch technique will be covered. No prerequisites are required for this class.

No prerequisites are needed for the class, the work-level is light to moderate.

Skill Level: Beginner

Age: 18+

About the Instructor: Classes taught by Kenneth of Fire & Brimstone Forge